Results 1 to 3 of 3

Thread: Slow Flow

  1. #1

    Slow Flow

    I have a Landa PGHW5 hot water machine It has 344 hours on it. When I first got it, and I turned the machine on the water came out of the wand immediately. Now, it seems like I turn it on and it takes a good 4 seconds before the water comes out the wand. It's running fine, and I do everything that the manual tells me to as far as maintanence is concerned at the time it tells me to do it. Any ideas? Thanks!!
    Suzanne F.
    Grime Away...with the Soft Touch!
    Lower Alabama



  2. #2
    Scale could be building up in your heat coil. Do a GPM test to see if there is a drop. After that bypass the heat coil and do the same test. Compare the results. If there is a difference, itís your coil. It can be cleaned.


    Sent from my iPhone using Tapatalk

  3. #3
    Thanks so much! I appreciate the advice!
    Suzanne F.
    Grime Away...with the Soft Touch!
    Lower Alabama



Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •