Author Topic: Big ???  (Read 1100 times)

0 Members and 1 Guest are viewing this topic.

Offline Chris

  • Hero Member
  • *****
  • Posts: 6468
    • Pressure Washing Corpus Christi, Texas
Re: Big ???
« Reply #8 on: June 22, 2008, 11:11:59 AM »
Give Mr. Jarrod a call. He has a very good system of doing decks and will save you both time and money with great results. Several others here also can advise you like Scott from the Sealer Store, Barry,
Don M., Celeste, etc...

There are many ways to do decks, most are faster than the old ways with great results. Give them a call.

Offline GTRider245

  • Hero Member
  • *****
  • Posts: 591
Re: Big ???
« Reply #9 on: September 17, 2008, 10:38:10 PM »
Hmmmm I must be in the minority here. I use multiple pump ups, one is just for decks and only runs cleaner through it. Another is for sealing lattice. Never had problems out of either one. I do not spray my decks in general though. Roller and a brush.

My third pump up has F-13 in it for gutters. I didnt think there was a better way to apply the F-13...

If I am missing something do let me know. All I know is this system seams to work well and I havnt had any incidents with it. Cost vs a Deck Bandit is staggering as well.
Kevin Stokes
Top Dawg Pressure Washing
Augusta, GA
(706)726-5700

Offline JC

  • Hero Member
  • *****
  • Posts: 4160
    • http://www.JCSoftWash.com
Re: Big ???
« Reply #10 on: September 18, 2008, 08:13:40 AM »
I have my f-13 in a pump up also. It worked great until I steped on the wand and cracked it  :bangin: :bash:
Jim Chesmore
JC Painting & Powerwashing LLC
Egg Harbor TWP, NJ
Atlantic County & Most South Jersey Areas
609-412-3033
www.JCSoftWash.com
http://www.merchantcircle.com/business/JC.Painting.And.Powerwashing.LLC.609-412-3033
Wash Softly & Spray Away The Dirt

Offline GTRider245

  • Hero Member
  • *****
  • Posts: 591
Re: Big ???
« Reply #11 on: September 18, 2008, 09:36:22 PM »
Pump up is quite cheap and easy to replace though....
Kevin Stokes
Top Dawg Pressure Washing
Augusta, GA
(706)726-5700

Offline Exterior Attack PW

  • Sr. Member
  • ****
  • Posts: 345
Re: Big ???
« Reply #12 on: September 19, 2008, 12:28:21 PM »
I use a backpack sprayer that works for me but I dont use the wand that comes with them. I took a 5 foot aluminum lance and bent it one foot from the end into a 45 degree angle. I screwed an adapter and meg nozzle to the sprayer end. I use a 3/4" ball valve on the other end with a 3/4 to 1/4 reducer into it which connects the other end of the lance. Lastly I screw a 1/4" straight barbed fitting to the 1/4" reducer on the bottom and connect the sprayer hose that comes off the sprayer. Believe it or not, it works very well. I built one because those plastic ones that comes with the sprayer never last. I have less than $20.00 invested in the whole wand.
Exterior Attack Pressure Washing
Melbourne, Florida 32934
(321) 243-1796
Ken D'Amato
Email:exteriorattack@yahoo.com
Firefighter Owned & Operated

Offline Exterior Attack PW

  • Sr. Member
  • ****
  • Posts: 345
Re: Big ???
« Reply #13 on: September 19, 2008, 12:41:54 PM »
I like the 5 foot lance because its long enough to reach high places. Plus you can switch out the meg nozzles for different applications.
Exterior Attack Pressure Washing
Melbourne, Florida 32934
(321) 243-1796
Ken D'Amato
Email:exteriorattack@yahoo.com
Firefighter Owned & Operated